Vantec UGT-ST644R Manuale Utente Scaricare il pdf (Pagina 7)

UGT-ST644R Page 7

2.2 Hardware Installation

1. Turn off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

Locate to an empty PCI Express x4, x8, or x16 slot on the

motherboard.

4. To install the board, carefully align the card’s bus connector with

the selected PCIe slot on the motherboard. Push the board down

firmly.

5. Attach your internal devices to the 4 Channel 6-Port SATA 6Gb/s

PCIe RAID Host Card.

6. Replace the slot bracket’s holding screw to secure the card.

7. Secure the computer cover and reconnect the power cord.

2.3 Creating and Managing Virtual Disk

2.3.1 Creating Virtual Disks

This section describes the steps for creating virtual disks using the

BIOS Configuration Wizard.

Press <Ctrl>+<M> to enter Marvell BIOS Setup

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Nessun commento

Vantec UGT-ST644R Manuale Utente Pagina 7